Sono riuscito a schiodare DHCP, RTC, SDCard, qui c'e' l'output su seriale: #set pins for ATTUATORE: 4 5 30 31 #Configuration loaded #sampletime:900 #mqttrootpath:report/lsucci/1012345,4412345/fixed/ #mqttserver:rmap.cc #mqttuser:lsucci #mqttpassword:mypassword123 #ntpserver: it.pool.ntp.org #thisnode: 65535 #channel: 93 # >> CONFIGURE NEW SENSOR: 0 #driver:I2C #node:1 #type:ITH #address:35 #mqttpath:254,0,0/103,2000,-,-/ #NEW driver: I2CITH #TH60mean setup retry #TH60mean setup retry #TH60mean setup retry error in setup Sensors # >> CONFIGURE NEW SENSOR: 1 #driver:I2C #node:1 #type:MTH #address:35 #mqttpath:0,0,900/103,2000,-,-/ #NEW driver: I2CMTH #THmean setup retry #THmean setup retry #THmean setup retry error in setup Sensors # >> CONFIGURE NEW SENSOR: 2 #driver:I2C #node:1 #type:TBR #address:33 #mqttpath:1,0,900/1,-,-,-/ #NEW driver: I2CTBR error in setup Sensors mac = 0h 26h 18h 73h 74h 75h #Try to configure Ethernet using DHCP Using ENC28J60 #My IP address is 192.168.1.105 #Netmask is 255.255.255.0 #Gateway IP address is 192.168.1.254 #DNS IP address is 192.168.1.254 #waiting for sync #ntp packet sended #NTP response: seconds since Jan 1 1900 = 3734434818 #15:00:18 04 05 2018 #Initializing SD card... #card initialized. #opening log data file on SD #write on the log file: 2018-05-04 15:00:18> Start #start delay to sync to even time: 882 Ho dovuto fare qualche leggera modifica a rmap.ino, mi direte se vanno bene. Verrei al makerspace l'8 maggio 2018 ore 20,30 per controllare il lavoro fatto e provare a inviare qualche misura. Nei prossimi giorni ditemi se riuscite ad esserci. Ciao. Lorenzo